Masonry Contractor in Alamo, TX - Brick and Block Work Built for Valley Heat
Premier Mission Concrete and Masonry is a masonry contractor based in Mission that works in Alamo, TX, repairing brick homes, building block and brick walls, and adding stone veneer, pavers and walkways to houses and small businesses.
- Licensed and insured.
- Free in-person estimates.
- Replies within 1 business day.
Brick homes and block walls across Alamo
Alamo is a short drive east of us in Mission, between San Juan and Donna, and most of what we see there is houses. Near the middle of the city you'll find established streets of one-story brick homes, while the newer subdivisions toward the edges mix brick fronts and stucco with block privacy walls around the back yards. Small shops and offices along the main roads bring their own work, from storefront brick to new walkways, and we do the same kind of work in Hidalgo to the southwest.
Most of these homes sit on a slab with a single layer of brick held to the frame behind it by small metal ties, so the brick is a skin and not the structure. That changes the job, because a crack in it usually points to the slab or the ties, and the fix has to suit both the cause and the look of brick that's had years of sun on it.
Our services in Alamo, TX
- Brick repair
Older brick homes around Alamo often end up with cracked, chipped or loose bricks after the ground moves. We find the cause first, then replace damaged brick with a close match.
- Tuckpointing
Valley sun and summer storms wear mortar joints down until they're sandy and open. We grind out the worn mortar and pack in new mortar matched in color and strength.
- Concrete block walls
Block privacy walls line many newer Alamo lots and take the wind full on. We set them on a solid footing, with steel and grout where the height calls for it.
- Stone veneer installation
Many Alamo owners want to dress up a plain stucco front or porch column. Our stone veneer installation goes on over a drainage layer so trapped water can get out.
- Foundation repair
Sticking doors and cracks off window corners usually mean an Alamo slab has shifted. We find where it moved and why, then recommend the right repair, not the biggest.
- Outdoor kitchen masonry
Long warm evenings make the back patio a second living room in many Alamo homes. We build grill islands and counters in block, brick or stone made for full sun.
What Alamo sun and clay ask of masonry
Much of the ground under Alamo is clay that swells after a hard rain and shrinks back during the long dry stretches. That movement shows up in masonry first, as stair-step cracks running through brick, a block wall pulling away from the house or a gap opening at a corner. Before we patch anything, I look at where the crack starts and which way it runs, because a crack that's still moving will open right back up through new mortar.
The sun does the rest. Mortar on south and west walls dries out and turns sandy sooner, and a summer storm will push water into any joint that's open, so we mix new mortar to match the old and work it early in the day before the heat can dry it out too fast.
Get a free on-site masonry estimate in Alamo
We'll reply within one business day to set a time, and I'll come out to your Alamo property myself. I walk the job with you and explain each part of it, from what failed to what it takes to fix it. The estimate is free, and there's no obligation to go ahead.
Brick, block and stone work
Alamo masonry questions answered
How do I get a building permit in Alamo, TX?
You apply with the City of Alamo, and its Planning and Development office takes building questions at 787-0006, option 4, with the application on the city's forms page. For a new business building, city staff release the permit once they approve the full submittal, including a complete set of plans. For work on a house, check with that office before we set a start date, and when your job does need a permit, we take care of the paperwork with the city and build the wait into the schedule.
Does a business moving into an existing building in Alamo need a city license?
Yes, a new business in an existing Alamo building needs a city business license, and that license includes a fire inspection. At the Planning office you give the address, the owner, the square footage and your State Comptroller tax ID, and anything the city requires, such as added parking or lighting, gets finished before the license is released. If masonry is part of getting the space ready, tell me your opening date at the estimate so we can plan around it.
What building code does Alamo use for walls and masonry?
The city's own list names the 2024 International Residential Code and the 2024 International Building Code for structural construction and maintenance. That list tags the residential code with a windstorm label, which is a good reminder that a tall yard wall here has to stand up to wind. We size the footing and the steel for the wall in front of us with that in mind.
Will the city of Alamo pick up old brick and concrete debris?
No, the city's brush and bulky item pickup leaves out construction material such as sheet rock, lumber and roof shingles, so broken brick, block and old mortar won't go out with it. Cleanup is part of our job, and the rubble our crew makes leaves with us. If you clear brush yourself before we start, keep it apart from any rubble, because Republic Services leaves brush mixed with other debris and you'd then pay to get rid of it.
How much does masonry work cost in Alamo, TX?
The price comes down to the size of the job, the material and how much has to come out before new work goes in. Matching an older brick costs more than plain block, a wall that needs a new footing costs more than one that only needs its joints redone, and a tight back yard adds labor. The schedule turns mostly on any permit wait and how long a matching brick takes to find, and at the estimate I walk the job with you and explain each part of the price.
What is the best way to match old brick on an Alamo house?
The best way is to match size, color, texture and the mortar around the brick together, because the right brick set in the wrong mortar still stands out. Sun fades brick here, so we compare against the weathered wall instead of a fresh sample. On older homes we can sometimes pull good brick from a spot nobody sees and use it where it shows.